PB10000 SERIES

Carbon/Graphite-Filled PTFE

Carbon/Graphite-filled PTFE materials have better wear resistance than carbon-filled PTFE materials. Carbon/Graphite-filled PTFE materials have excellent extrusion resistance and good wear resistance and will work well in both lubricated and non-lubricated environments. 

Carbon/Graphite-filled PTFE materials are used in static and dynamic applications and used against chromium-plated surface and steel. 

PBY Material Codes: 

PB10105 - 23% Carbon 2% Graphite-Filled PTFE 

Order Material

Carbon/Graphite-Filled PTFE Spec. Summary 


Property Test Method Units 25 CARBON/GRAPHITE
Color - - Black
Specific Gravity ASTM D792 - 1.95 - 2.150
Hardness Shore D ASTM D2240 - 65 - 75
Tensile Strength, min. ASTM D4745 PSI [MPa] 1,400 [9.6]
Elongation at Break, min. ASTM D4745 % 20
Second Melt Peak Temp. ASTM D3418 °F [°C] 621 [327]
Glass Transition Temp. ASTM D3418 °F [°C] -143 [-97]; 246 [119]

Material Available In:


Carbon/Graphite-Filled PTFE Rods

Carbon/Graphite-Filled PTFE Tubes

Carbon/Graphite-Filled PTFE Sheets

Carbon/Graphite-Filled PTFE Material Properties


  • Excellent for dry and poorly lubricated environments

  • Improved thermal and electrical conductivity vs Virgin PTFE

  • Reduced deformation under load compared to Virgin PTFE

Typical Applications for Carbon/Graphite-Filled PTFE


  • Wear resistant gaskets and seals

  • Rider rings and Pistons

  • Oil and Gas

Carbon/Graphite-Filled PTFE Requirements


This product meets ASTM D4745 Type I Grade 8 and AMS 3678/7 requirements.

Carbon/Graphite-Filled PTFE Material Data Sheet Downloads


PB10105 - Material Data Sheet

Carbon/Graphite-Filled PTFE Spec Compliance


Compliance
Compliance

References


  • Wypych, George. Handbook of Polymers. 2nd Ed., ChemTec/Publishing, 2016.
  • Ebnesjjad, Sina. Fluoroplastics Vol1 & Vol2. 2nd Ed., Elsevier Inc., 2015.
  • Aerospace Materials Specifications for PTFE materials (AMS3678)
  • American Society for Testing and Materials (ASTM) Standards